I. Auto Power On
For M2 private model, BIOS version: BOX IGD.27 X64
1-1, press the PC switch button and then quickly hit the keyboard F2 key to enter the BIOS Setup, select Boot>Set Auto Power on to Enabled in order.
1-2、Save & Exit>Save Changes and Exit.
Open the FTPM2.0.
2-1, press the PC switch button and then quickly hit the F2 key to enter the BIOS Setup, select Trusted Computing>Set Security Device Support to Enable, and select Save & Exit>Save Changes and Exit after the setup is completed.
2-2, after reboot, enter BIOS>Trusted Computing option again to confirm whether to open successfully, as shown in the following figure for the opening of the successful state.
Disable PXE boot (network boot)
Overview: UEFI PXE has been enabled by default in this BIOS, when the hard disc is not installed in the computer, the operating system is damaged or the Boot entry is set abnormally, it will boot through UEFI PXE, resulting in failure to access the operating system in the hard disc. The following figure shows the screenshot of PXE boot.
After entering the PXE boot can not enter the operating system, you can follow the steps below to troubleshoot one by one.
3-1, press Ctrl+Alt+Delete to restart the computer, after restarting, quickly hit the keyboard F2 key to enter the BIOS Setup in order to select Boot>Set Boot option #1 to Hard Disk:Windows Boot Manager.
3-2、选择高级>网络堆栈配置>将网络堆栈设置为已禁用。
3-3. Select Save & Exit>Save Changes and Exit after setting is completed, or press F10 to save and exit.
