We have done a lot of work to make our mini computers smaller, and for our smaller versions of the FMP06 and FMP11, there is one thing that buyers should know before placing an order: if you don't buy a chassis with VESA, we will send a version that can install mSATA and 2.5-inch SATA 2 storage, and if you buy a chassis with VESA, you get a If you buy a chassis with VESA, you will get a computer that can only use mSATA SSDs, not 2.5-inch laptop storage. Because we designed the chassis with only 4 screws, one version has 4 hardware screws to secure a 2.5-inch hard drive, and the other version has 4 screw holes dedicated to VESA.
Now, let's see how to mount the minicomputer to the back of the monitor.
Step 1: Locate the VESA and its screw kit from the package and make sure your monitor has 4 VESA holes, such as the Philips monitor in the picture.
Step 2. Secure the VESA to the monitor using the 4 screws.
Step 3. Attach the other 4 screws to the Vesa holes on the micro PC as shown:
Step 4. Hook the mini PC directly to the VESA of the monitor.
What do you think if we put the antenna here? ：）
