Overview: Industrial mini computers are widely used, and to ensure good compatibility, BIOS in Intel 10th generation and earlier product lines typically support two boot modes: UEFI and Legacy. Sometimes, it's necessary to configure UEFI-only boot... Read More | Share it now!
标签： mini pc
F9-11 th Gen Configuration Auto Power on Steps
Step 1: Connect the keyboard to a USB port, preferably using a wired connection. (Bluetooth keyboards cannot access BIOS.) Step 2: Press the power button to start the computer, then promptly press the Del key on the keyboard to enter BIOS Setup.... Read More | Share it now!
Why does the graphics card core display Intel on the 12th generation core graphics card model ® UHD?
Overview: The Intel 12th generation CPU, including models like M1-i5-1240P, i7-1280P, and i7-1265U, are listed by Intel as eligible for "Intel® Iris® Xe Graphics." However, some customers have reported that upon receiving their computers, the... Read More | Share it now!
M3-12\13 th Gen Configuration Power-On Self-Start Procedure
For M3-12 and 13 generation models: Step 1: Ensure that the computer is connected to a keyboard (preferably wired, as Bluetooth keyboards may not access BIOS). Press the power button, then promptly press the Del key on the keyboard to enter... Read More | Share it now!
How to enable Auto Power on?
Step 1:Open the chassis by removing the 4 screws on the bottom of the chassis with the power off. Step 2:Locate the PWRON1 pin on the motherboard Step 3:Prepare a 2.54 mm pitch jumper cap and insert it into pin 2 and pin 3 for power-on... Read More | Share it now!
Solution to Frequent Reset of Motherboard BIOS
Problem Description:Some computers that have been in use for a little while always have BIOS reset problems, and all the original settings in the BIOS are lost. Solution: (you can follow the steps below to check one by one)1, may be the CMOS... Read More | Share it now!
（P04-i5-3317U）How to Enable Auto Power on？
Step 1: Press the Switch (SW) button and then quickly tap the Del button on the keyboard to enter BIOS setup; Step 2: Select Chipset>PCH-IO Configuration>Configure Restore AC Power Loss to Power On in order after entering BIOS... Read More | Share it now!
(H3D-N100)How to configure Auto Power on?
Step 1:After pressing the computer's On/Off button, quickly press the Del/Delete key on the keyboard to enter BIOS setup. Step 2:In BIOS, select Chipset>PCH-IO Configuration>Configure Power Failure to Always on, and press F10 on the... Read More | Share it now!
GT-i7-10870H How to turn on Auto Power on？
Overview: The GT-i7-10870H features a motherboard with a designated 3-pin PWRON1 connector. By default, the power-on self-start function is disabled. Follow the steps below to enable this function. Tools Needed: 1*Cross screwdriver 1*5mm... Read More | Share it now!
How to configure multiple networks (Ethernet, WLAN, 4G) to connect to the Internet, Windows domains, or both simultaneously under the Windows 10-11 system?
How to configure multiple networks (Ethernet, WLAN, 4G) to connect to the Internet, Windows domains, or both simultaneously under the Windows 10-11 system? Step 1: Right click on the start menu to open Run, Run, type "gpedit.msc" to open the "Local... Read More | Share it now!