Introduction:This article presents a solution for using the Realtek RTL8821CE wireless network card with a "mini computer" running Ubuntu. In many Linux distributions, including Ubuntu, the Realtek RTL8821CE driver is not pre-installed in the system... Read More | Share it now!
标签： mini computer
GT-12th Gen-How to set Auto Power On
This guide applies to GT 12th models with H610 motherboardsbios version: WZ610T3R100-005 Turn on the computer switch button and quickly hit the keyboard Del key to enter the BIOS Setup, in turn, select Advanced>Power Management>Set Restore AC... Read More | Share it now!
J1900 series model, stuck on Windows welcome page, unable to access system desktop solution
Solution for J1900 series models that are stuck on the Windows Welcome page after booting and cannot access the system desktop. Applicable models: J1900 series CPU models Failure phenomenon: After booting up the computer, you can't... Read More | Share it now!
GT-9th Gen-How to set Auto Power On
For GT-9th Gen (H310 chipset) with Type-c interface BIOS version: 310CT101 To access the BIOS Setup, press the PC switch button, and swiftly tap the Del key on the keyboard. Navigate to Chipset > PCH-IO Configuration, and adjust "Restore AC... Read More | Share it now!
S210-How to set Auto Power On
PS. This method is applicable to all S210 series. Step 1. Enter BIOS Setup by pressing the PC switch button and then quickly hitting the Del key on the keyboard Step 2. Select H/W & Power> to set State After G3 to S0 State. Step... Read More | Share it now!
H3-J6412-How to set Auto Power On
For H3-J6412, BIOS version: GEHL 1 1.04--GEHL 1 1.10 To access the BIOS Setup, power on the PC by pressing its switch button, then promptly press the Del key on the keyboard. Navigate to Chipset > PCH-IO Configuration and adjust "State After... Read More | Share it now!
How to install Windows 11 on a computer that does not support Windows 11?
When attempting to install the Windows 11 system, you might encounter a message stating, "This PC can't run Windows 11. This PC doesn't meet the minimum system requirements to install this version of Windows. For more information, visit... Read More | Share it now!
M7-How to set Auto Power On
For M7-11 generation models 1. To access the BIOS Setup, press the power button on the PC and promptly press the Del key on the keyboard. Navigate to Advanced > Power Management Configuration and choose "Restore AC Power Loss" to "Power On".... Read More | Share it now!
M5-How to set Auto Power On
Applicable to all M5 models 1. When the device is powered off, loosen and remove the four screws at the bottom of the chassis to open the bottom case. 2. Locate pin U72 on the motherboard, and move the jumper cap from pin 1 to pins 2 and... Read More | Share it now!
M3-How to set Auto Power On
Suitable for all M3 models 1. To access the internal components of the chassis, start by powering off the device. Then, loosen and remove the four screws located at the bottom of the chassis. Once the screws are removed, carefully lift and remove... Read More | Share it now!