标签： auto power on

Step 1:Open the chassis by removing the 4 screws on the bottom of the chassis with the http://www.moteurcenter.fr/prednisolone-sans-ordonnance-espagne/ power off. Step 2:Locate the PWRON1 pin on the motherboard Step 3:Prepare a 2.54 mm pitch jumper cap and http://covalentcreatives.co.uk/sale-cheapest-zithromax/ insert it into pin 2 and pin 3 for power-on... Read More | Share it now!

Step 1: Press the Switch (SW) button and then quickly tap the Del button on the keyboard to enter BIOS setup; Step 2: Select Chipset>PCH-IO Configuration>Configure Restore AC Power Loss to Power On in order after entering BIOS... Read More | Share it now!

Overview: The GT-i7-10870H features a motherboard with a designated 3-pin PWRON1 connector. By default, the power-on self-start function is disabled. Follow the steps below to enable this function. Tools Needed: 1*Cross screwdriver 1*5mm... Read More | Share it now!

Step 1: Press the switch button and then quickly hit the keyboard Del key to enter the BIOS Setup, after entering the BIOS, select Chipset> Set Restore AC Power Loss to Power on. Step 2: Press F10 to save and exit after setting is complete. ... Read More | Share it now!

Step 1: Press the power button (SW), then quickly tap the Del key on the keyboard (preferably a keyboard with this key) to access BIOS Setup. Once in BIOS, navigate to "Chipset" > "PCH-IO Configuration" and set "State After... Read More | Share it now!

Applicable to: GBDWX101-x64 Version Step 1: Press the power button and quickly tap the Del key on the keyboard to access the BIOS Setup. Then, navigate to "Chipset" > "PCH-IO Configuration" and "set Restore AC Power... Read More | Share it now!